ISO国际标准CD、DIS阶段投票征求意见表格（模板）

Template for comments and secretariat observations

Date: 2014-04-23

Document: N12

Project: – ISO/CD 13061-12

MB/NC1

Line number

(e.g. 17)

Clause/ Subclause

(e.g. 3.1)

Paragraph/ Figure/ Table/

(e.g. Table 1)

Type of comment2

Comments

Proposed change

Observations of the secretariat

CN

Foreword

ED

“Part 11: Determination of static impact indentation”

Part 11: Determination of resistance to impact indentation

CN

16

6.3.3

TE

“Interval of 8h” should be in accordance with each other of all parts in “Physical and mechanical properties of wood – Test methods for small clear specimens” other standards.

Change to “interval of 24h”, as it is in other FDIS

CN

8.1

para. 1

ED

The static hardness, H_W, of each test piece at a moisture content, W, at the time of test,

Change “ H_W”  to “H_ω”. Change “W” to  “ω”

CN

35

8.1

Equation (1)

ED

“H_W” Should be changed to “H_ω”

Change “ H_W”  to “H_ω”

CN

8.2

para. 1, Equation (2)

ED

Change “ H_W”  to “H_ω”. Change “W” to  “ω”

CN

8.2

“nationally or internationally recognized method” is too vague; shall be obtained from national standards.

Change clause 8.2 to:

8.2 When necessary, the static hardness of the test piece H_ω shall be adjusted to a 12 % moisture content to an accuracy of 1 N by the following formula which is valid for a moisture content of (12 ± 3) %:

Where;

   is the correction factor for moisture content, whose value shall be obtained from national standards.

CN

16

8.3

TE

“1 KJ/m² (MPa)” should be “1N”

Change “1 KJ/m² (MPa)” to “1N”